How to Unscrew Kitchen Faucet: A Step-by-Step Guide for Beginners
Learn how to unscrew a kitchen faucet step by step, from shutting off water to loosening the mounting nuts, so you can remove it for repair or replacement.
Updated November 2026
To unscrew a kitchen faucet, shut off the water supply, disconnect the supply lines, and loosen the mounting nuts or locknut under the sink. Most faucets come off in under an hour with basic hand tools. This guide walks through the process for common single-handle and two-handle faucets so you can remove yours safely.
Before You Start: Shut Off the Water
Turn off the two angle stop valves under the sink by rotating them clockwise until they stop. If the valves are stiff or do not close fully, shut off the main water supply to the house instead. Then open the faucet to relieve remaining pressure and catch any water that drains out.
Shopping for one? See our guide: Delta Tap Kitchen Faucet Review: Key Features Explained.
Step-by-Step: Removing the Faucet
- Clear the cabinet and place a towel and bucket beneath the faucet.
- Disconnect the supply lines from the angle stop valves using an adjustable wrench. Hold the valve steady with a second wrench while you loosen the nut.
- Remove the spray hose and any weight or clip that attaches it to the sink deck, if your model has one.
- Reach under the sink and locate the mounting nut or plastic locknut that secures the faucet base. Loosen it by turning counterclockwise.
- If the faucet is held by a metal mounting rod or bracket, remove that hardware first.
- Lift the faucet straight up and out of the sink holes. Scrape away old putty or sealant from the deck with a plastic scraper.
Handling Stuck Nuts
Mineral buildup and corrosion can lock mounting nuts in place. Apply penetrating oil and wait 10 to 15 minutes before trying again. Use a basin wrench, which reaches tight spots under the sink, and avoid using excessive force on plastic parts that can crack.
Tools and Preparation Checklist
- Adjustable wrench and basin wrench
- Bucket and old towels
- Flashlight or headlamp
- Penetrating oil
- Plastic putty knife or scraper
- Replacement supply lines if the old ones are cracked
Factors That Affect the Process
Single-hole and three-hole faucets usually mount with one central nut, while center-set and widespread models may use separate nuts for each handle. Older faucets sometimes use a brass nut that is harder to reach. Check your sink for a deck plate or a sprayer port, since these can add extra fasteners. If you are planning a replacement, measure the number of holes in your sink first. A guide to choosing the right layout is available in Three Hole Faucet Kitchen Guide: Setup, Sizing and Buying Tips.
Common Mistakes
- Skipping the water shutoff, which leads to spraying and flooding.
- Forcing a stuck nut and cracking the faucet body or the sink deck.
- Forgetting to plug or cap the supply lines so debris does not enter the pipes.
- Reusing old washers or gaskets when reinstalling. Replace them if they look worn.
- Pulling the faucet without photographing the connections first, which makes reassembly harder.
Recommended Gear
A basin wrench makes it much easier to reach mounting nuts in the cramped space under the sink. View on Amazon
Penetrating oil loosens corroded threads without damaging the surrounding parts. View on Amazon
A headlamp keeps both hands free while you work in a dark cabinet. View on Amazon
FAQ
Do I need to turn off the main water to remove a kitchen faucet?
Not always. If the angle stop valves under the sink close fully, shutting them off is enough. If they are stiff or leak, turn off the main supply to be safe.
What if the faucet nut is inaccessible?
A basin wrench is designed for tight spaces and will usually reach it. Removing the cabinet back or a drawer can also give you more room.
Should I replace the supply lines when I remove the faucet?
It is a good idea if they show cracks, bulges, or corrosion. Replacing them while the faucet is out is usually simple. If you are unsure about plumbing work, consult a licensed plumber.
Conclusion
Unscrewing a kitchen faucet comes down to shutting off the water, disconnecting the supply lines, and loosening the mounting nut. Work slowly, protect the sink and cabinet, and use the right wrench for tight spaces. Once the old faucet is out, you can clean the deck and install a repair or replacement with confidence.
Related reading
- Moen Faucet Drips Kitchen: How to Find and Stop the Leak (Step-by-Step)
- Kitchen Faucet with Pullout Spray: How to Choose the Right One (2026)
- Kitchen Faucet with Pull-Out Sprayer: How to Choose and Install One (2026)
- Kitchen Faucet Moen Cartridge: How to Identify, Remove and Replace It
- Kitchen Faucet Four Hole: How to Choose and Install One (2026)
Ready to choose one?
