We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

How to Fix Bathroom Faucet Leak: A Step-by-Step Guide for Beginners

Learn how to fix bathroom faucet leak problems yourself. Find the source, shut off water, replace the worn part, and stop the drip in under an hour.

Updated November 2026

Most bathroom faucet leaks come from a worn washer, cartridge, or O-ring, and you can usually fix them with a few basic tools. In this guide, you’ll learn how to fix bathroom faucet leak problems by finding the source, shutting off the water, replacing the failing part, and testing your repair. Plan on about an hour for most single-handle or two-handle faucets.

Find Where the Leak Is Coming From

Before you take anything apart, confirm where the water is escaping. A drip from the spout means the internal seal or cartridge is failing. Water pooling around the base or leaking from under the handle points to a loose seal, a worn O-ring, or a loose packing nut. Water at the aerator (the screen tip of the spout) usually signals sediment or a worn aerator gasket.

Shopping for one? See our guide: 4 Best Delta Bathroom Faucet Repair Kit Picks for Every Fix.

Shut Off the Water and Prepare Your Workspace

Turn off the shutoff valves under the sink, then open the faucet to drain remaining water. Cover the drain with a towel so a dropped screw can’t disappear. Place a rag over the sink basin as well.

  1. Gather a flathead and Phillips screwdriver, an adjustable wrench, a small Allen wrench set, plumber’s grease, and a replacement cartridge, washer, or O-ring matched to your faucet brand.
  2. Take a photo of the faucet before disassembly so you can recall how parts are arranged.
  3. Pop off the decorative cap on the handle, then remove the handle screw to lift the handle free.

Replace the Worn Part

The fix depends on your faucet type. Compression faucets use rubber washers and seats. Cartridge faucets (single-handle and many two-handle models) use a cartridge that often needs full replacement. Ball faucets use springs, seats, and O-rings around a rotating ball.

Compression Faucets

Unscrew the packing nut, lift out the stem, and replace the rubber washer at its base. Check the brass valve seat for pitting. If it looks rough, a seat wrench can resurface or replace it.

Cartridge Faucets

Remove the retaining clip or nut, pull the cartridge straight out, and install an identical replacement. Match the cartridge to the manufacturer’s model number, since sizes and orientations differ. Lubricate new O-rings with plumber’s grease before reinstalling.

Reassemble, Test, and Confirm the Fix

Reverse your steps, tightening screws gently so you don’t crack the cartridge housing. Turn the shutoff valves back on slowly, then check for leaks at the base and handle. Run the faucet on hot and cold for a minute. If the drip continues, the seat or cartridge may need closer inspection, and a plumber can help if the body of the faucet is damaged.

  • Plumber’s grease keeps O-rings sealing smoothly and prevents them from tearing during reassembly. View on Amazon
  • Faucet repair kit bundles common washers, O-rings, and seals so you can match parts quickly. View on Amazon
  • Adjustable wrench loosens packing nuts and supply connections without rounding them off. View on Amazon

Common Mistakes to Avoid

  • Skipping the water shutoff step, which can soak the vanity and cabinet floor.
  • Buying a generic cartridge without checking the brand and model number.
  • Overtightening handle screws, which can crack plastic or brass components.
  • Forgetting to lubricate new O-rings, which can cause them to tear or leak early.
  • Reusing a worn valve seat, since a new washer won’t seal over pitting.

FAQ

Why does my bathroom faucet keep dripping after I replace the washer?

The valve seat is often the culprit. If it’s pitted or corroded, a new washer can’t seal properly, so resurfacing or replacing the seat usually solves it.

Can I fix a bathroom faucet leak without turning off the main water supply?

Usually yes, because most sinks have individual shutoff valves under the basin. If those valves are stuck or missing, shut off the main supply to the home first.

When should I call a plumber instead of fixing the leak myself?

Call a licensed plumber if the faucet body is cracked, the supply lines are corroded, or the leak continues after replacing the cartridge or washer. Water damage near electrical outlets or wiring also warrants professional help.

Conclusion

A bathroom faucet leak is usually a worn washer, cartridge, or O-ring, and most homeowners can fix it with basic tools. Identify the source, shut off the water, replace the correct part, and test your work. For more detailed steps on your specific faucet style, check the related guides below.

Related reading: How to Repair a Bathroom Faucet Leak: A Step-by-Step Guide for Beginners and How to Fix a Dripping Bathroom Sink Faucet: A Step-by-Step Guide.

Lauren Holland

About Lauren Holland

Lauren Holland is part of our editorial team and reviews and edits our kitchen & bathroom fixtures guides, checking product details against manufacturer specifications and owner feedback.

About the author

Lauren Holland
Lauren Holland

Lauren Holland writes reviews and buying guides for Kitchen Bath Channel.