We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

How to Fix a Bathroom Faucet: A Step-by-Step Guide for Beginners

Learn how to fix a bathroom faucet yourself. Find the source of a drip or leak, shut off the water, replace the worn part, and test your repair.

Updated November 2026

Most bathroom faucet problems come down to a worn washer, cartridge, or O-ring, and you can usually fix a bathroom faucet yourself in under an hour with basic hand tools. The process is simple: identify the faucet type, shut off the water, remove the handle, replace the worn part, and reassemble. This guide walks through each step so you can stop the drip and get your sink working properly again.

Identify the Faucet Type and Source of the Problem

Before you take anything apart, figure out what kind of faucet you have, because the repair depends on the internal mechanism. Compression faucets use rubber washers and seats and are common on older homes. Cartridge faucets, including most single-handle models, use a sealed cylinder. Ball faucets and ceramic disc faucets each have their own parts. Look at the handle and the base of the faucet to narrow it down, and check the manufacturer’s name on the body if you can find it.

Shopping for one? See our guide: 4 Best Delta Bathroom Faucet Repair Kit Picks for Every Fix.

Next, confirm where the leak is coming from. A drip from the spout usually points to a worn cartridge, washer, or seat. Water leaking around the base of the handle often means a failed O-ring or packing nut. If you see water pooling under the sink, check the supply lines and shutoff valves, since those are separate repairs.

Shut Off the Water and Remove the Handle

Close the hot and cold shutoff valves under the sink, then open the faucet to drain any remaining water. Place a towel in the sink basin so small parts cannot fall down the drain.

  1. Pry off the decorative cap on the handle, usually with a flathead screwdriver.
  2. Remove the handle screw, typically with a Phillips or Allen wrench.
  3. Lift the handle straight off. If it is stuck, wiggle it gently rather than forcing it.
  4. Unscrew the retaining nut or bonnet with an adjustable wrench, wrapping the jaws in tape to protect the finish.

Replace the Worn Part

Replacing a Washer or O-Ring

On compression faucets, remove the stem, pull off the old rubber washer, and secure a new one of the same size. Replace the O-rings on the stem with matching sizes, and apply a thin layer of plumber’s grease before reinstalling. Manufacturers generally recommend exact-match replacement parts, so bring the old washer to the hardware store.

Replacing a Cartridge

For cartridge faucets, pull the old cartridge straight up after removing the retaining clip. Note how it is oriented, since most cartridges only fit one way. Insert the new cartridge, align the tabs with the faucet body, and secure the clip. Many faucet manufacturers sell cartridges specific to their models, so match the brand and model number.

Reassemble and Test the Faucet

Reinstall the parts in reverse order, tightening the retaining nut snugly but not with full force, since overtightening can crack the body or damage new seals. Replace the handle, screw, and cap. Slowly open the shutoff valves, then turn the faucet on and off several times while checking for leaks around the base and spout. Let the water run for a minute to clear any debris from the lines.

Common Mistakes to Avoid

  • Skipping the shutoff valves. Water will spray when you remove parts, so always close them first.
  • Buying parts without matching the brand, size, or model. Bring the old part to the store or photograph the faucet.
  • Overtightening the nut. This is the most common reason a fresh repair starts leaking again.
  • Losing small parts down the drain. Keep the drain plugged with a towel or stopper during the repair.
  • Forgetting to lubricate O-rings. A thin coat of plumber’s grease helps them seal and move smoothly.
  • Adjustable wrench: Gives you a firm grip on retaining nuts without marring the finish. View on Amazon
  • Plumber’s grease: Keeps O-rings and washers sealed and prevents them from tearing during reassembly. View on Amazon
  • Faucet repair kit: Includes common washers, O-rings, and seats for several faucet types, which helps when the exact part is hard to identify. View on Amazon

For more detail on specific symptoms, see How to Fix a Dripping Bathroom Faucet: A Step-by-Step Guide for Beginners and Bathroom Faucet Is Leaking: How to Find and Fix the Drip Yourself. If your faucet is a Moen model, Fix Moen Bathroom Faucet: A Practical Guide (2026) covers brand-specific steps.

FAQ

How do I know if I need a new cartridge or just a washer?

If the faucet uses a washer and seat, replacing the washer usually solves a drip. If it has a single handle or a sealed cylinder, the cartridge is likely the culprit and replacing only the washer will not help.

Can I fix a bathroom faucet without turning off the main water supply?

Yes, in most homes you only need to close the individual shutoff valves under the sink. If those valves are old or do not seal, you may need to shut off the main supply instead.

When should I call a plumber?

Call a licensed plumber if the leak continues after the repair, if the valves will not shut off, or if you see corrosion or cracks in the faucet body or supply lines. A professional can also advise on code requirements in your area.

Conclusion

Fixing a bathroom faucet is mostly a matter of identifying the faucet type, replacing the worn washer, O-ring, or cartridge, and reassembling without overtightening. With the water shut off and the right replacement part, most drips stop within an hour. If the problem persists, a licensed plumber can confirm the cause and make the repair safely.

Lauren Holland

About Lauren Holland

Lauren Holland is part of our editorial team and reviews and edits our kitchen & bathroom fixtures guides, checking product details against manufacturer specifications and owner feedback.

About the author

Lauren Holland
Lauren Holland

Lauren Holland writes reviews and buying guides for Kitchen Bath Channel.