Moen Kitchen Faucet Integra: Identify, Choose and Maintain Yours (2026)

By Miles Sinclair

Updated November 2026

A Moen Kitchen Faucet Integra is a single-handle faucet line that many homeowners recognize by its clean lines and smooth lever action. This guide explains how to identify your model, what to check before buying parts or a replacement, and how to handle routine maintenance so the faucet keeps working well. Once you finish, you will know which details matter and where to look for the correct components.

Identify Your Moen Kitchen Faucet Integra Model

Model numbers and style names vary between Moen releases, so confirm your exact model before ordering anything. The model number is usually printed on the faucet body, on the underside of the spout, or on the original box and installation sheet. Matching the number matters because cartridges, spray heads and handles are not always interchangeable across generations.

Shopping for one? See our guide: 6 Best Kitchen Sink Faucet Moen Models for Every Need (2026).

If the packaging is gone, note the number of handles, whether the spray is a pull-down or side sprayer, and the finish. A single-handle design with a lever on the body points to a different cartridge than a two-handle setup, so check which configuration you have before shopping for parts.

Check the Cartridge and Common Wear Points

Most drips and stiff handles trace back to the cartridge, the internal part that controls water flow and temperature. Turn off the water supply under the sink, open the faucet to relieve pressure, and then compare your cartridge with the one listed for your model. Mineral buildup and worn rubber seals are the usual causes of trouble.

Other wear points include the aerator at the spout tip and the O-rings around the base. Clean the aerator by unscrewing it and soaking it in white vinegar. Inspect O-rings for cracks or flattening, and replace them if they look compressed. If you want more background, see Best Kitchen Faucets for Style and Function: 3 Moen Models Compared.

Step-by-Step Maintenance and Replacement

Once you know which parts need attention, follow a consistent sequence. Work slowly and keep small parts together so nothing gets lost in the sink drain.

Shut off both hot and cold supply valves under the sink and open the faucet to drain remaining water.
Remove the handle, usually by loosening a set screw or cap, and pull out the cartridge or retaining clip.
Take the old cartridge to a hardware store or compare it against the model listing to confirm a match.
Clean the valve body and seats, removing any grit or mineral deposits.
Insert the new cartridge with the orientation marks aligned, then reassemble the retaining clip and handle.
Restore the water supply slowly and check all connections for leaks, running the faucet on hot and cold.

For more detail on specific repairs, see How to Repair a Leaking Moen Kitchen Faucet: A Step-by-Step Guide and Replacement Cartridge for Moen Kitchen Faucet: A Step-by-Step Guide (2026).

Choosing Replacement Parts and Accessories

When buying parts, match the model number first, then consider finish and sprayer type. A side sprayer or pull-down head may need its own hose and weight, and these are not always included with a cartridge. Readers comparing alternatives can review Moen vs Kohler Kitchen Faucet: 3 Best Picks Compared (2026) to see how design differences affect repair choices.

Component	What to check
Cartridge	Exact match to model number and handle style
Aerator	Thread size and whether it is a standard or laminar flow type
Spray head	Compatibility with the hose and whether it is pull-down or side mount
O-rings and seals	Size and material matched to the original set

Common Mistakes

Ordering a cartridge without confirming the model number, which often leads to a return.
Forgetting to shut off the supply valves before disassembly, causing a sudden spray under the sink.
Overtightening handle screws, which can crack plastic components or strip threads.
Reassembling the cartridge with the wrong orientation, resulting in reversed hot and cold water.
Skipping a leak test after reassembly, so small drips go unnoticed until they cause damage.

Recommended gear

A basic set of tools makes faucet work easier. A small adjustable wrench helps with supply connections, and a plumber’s grease keeps O-rings supple during reassembly. A set of hex keys covers the set screws found on many handles. You can find these by searching View on Amazon, View on Amazon and View on Amazon.

FAQ

Where is the model number on a Moen Kitchen Faucet Integra?

It is usually printed on the faucet body or the underside of the spout. The original box and installation sheet also list it.

Can I replace the cartridge myself?

Many homeowners can handle cartridge replacement with basic tools and the supply valves shut off. If you are unsure about connections or water damage risk, consult a licensed plumber.

Why does my faucet still drip after replacing the cartridge?

Check that the new cartridge is seated correctly and that the O-rings are intact. Mineral debris in the valve body can also prevent a proper seal, so clean it before reassembly.

Conclusion

Identifying your model number and checking the cartridge are the most useful first steps for any Moen Kitchen Faucet Integra repair. A careful, sequential approach keeps water from leaking and protects the finish. Keep the model information handy so future parts and maintenance go smoothly.

Ready to choose one?

About Miles Sinclair

Miles Sinclair is part of our editorial team and reviews and edits our kitchen & bathroom fixtures guides, checking product details against manufacturer specifications and owner feedback.

About the author

Miles Sinclair

Miles Sinclair writes reviews and buying guides for Kitchen Bath Channel.