6 Best Replace Moen Kitchen Faucet Aerator Options for Easy Swaps (2026)

Updated November 2026

If you are looking to replace Moen kitchen faucet aerator inserts, the right choice comes down to three things: the flow rate, the thread type on your faucet spout, and whether the insert is designed to fit Moen’s aerator housing. This guide compares six replacement aerators that are widely listed for Moen kitchen and bathroom sinks. Each one was judged on its stated specifications, the brand or manufacturer reputation behind it, and the patterns owners tend to mention in feedback, including fit, spray quality and whether the screen clogs quickly.

Our Top Picks

Quick Comparison

Product	Best for	Key feature
116711 Faucet Aerator 1.5 Gpm for Moen Bathroom Kitchen Sink Inserts	Most Moen kitchen and bath faucets	1.5 GPM flow restriction, 2-piece pack
Moen Eco-Performance Aerator Flow Restrictor, 1.5 Gpm	Owners who want a Moen-branded insert	Moen Eco-Performance design, 116711 model
SHAP+ Faucet Aerator, Flow Restrictor Insert (12pcs)	Mixed or uncertain thread types	Includes washers for internal and external threads
Moen 3919 2.2 GPM Male Thread Kitchen Faucet Aerator	Kitchens where stronger flow matters	2.2 GPM male-thread chrome aerator
3 Pack Faucet Aerator, 116711 (black)	Multi-sink replacement and spares	Three replacements in one pack
LaWana 216721 Water Faucet Aerator for Moen	Water-saving and reduced splash	1.0 GPM with honeycomb anti-splash filter

116711 Faucet Aerator 1.5 Gpm for Moen Bathroom Kitchen Sink Inserts Replacement Parts 2 pcs

Best for: Best overall

This suits homeowners who know their Moen faucet uses a 116711-type aerator and want a straightforward swap at a moderate flow rate. The listing describes it as a 1.5 GPM insert for both bathroom and kitchen sinks, which covers the widest range of Moen fixtures.

Key specs

• Flow rate: 1.5 GPM
• Model reference: 116711
• Quantity: 2 pieces

Pros

• Matches the common Moen 116711 model reference
• Two pieces give you a spare
• Moderate flow suits everyday dishwashing

Cons

• Flow is not adjustable, so pressure-sensitive users may want a different rate
• Still requires confirming your faucet’s aerator size before ordering

Bottom line: A sensible first choice for most Moen owners who want a direct replacement at a standard flow rate.

View on Amazon

Moen Eco-Performance Aerator Flow Restrictor, 1.5 Gpm – Aerator Insert, 116711

Best for: Best for genuine-part replacement

Owners who prefer a Moen-branded insert, and want to keep the original water-saving design, tend to look at this one. It is aimed at people who want the aerator to match what the faucet came with.

Key specs

• Flow rate: 1.5 GPM
• Model reference: 116711
• Design: Moen Eco-Performance flow restrictor

Pros

• Brand-matched design for Moen faucets
• Helps maintain the original water-saving flow
• Easy to identify by model number

Cons

• Typically sold as a single insert, so there are no spares
• Owners sometimes report it is harder to find in stores

Bottom line: Best for anyone who wants the original-style Moen part and plans to keep the faucet long term.

View on Amazon

SHAP+ Faucet Aerator, Flow Restrictor Insert, Sink Aerator Replacement Parts, with Washer (12pcs)

Best for: Best for mixed-thread faucets

This pack suits people who are not sure whether their faucet uses internal or external threads. The listing states it fits both thread types and includes washers, which makes it useful for trial fitting or for keeping spares on hand.

Key specs

• Quantity: 12 pieces
• Thread compatibility: internal and external
• Includes washers

Pros

• Covers both internal and external thread types
• Large quantity for spares or multiple sinks
• Washers included

Cons

• Not Moen-branded, so fit should be checked against your model
• Owners may need to try more than one piece to find the best seal

Bottom line: A practical pick when you are unsure of thread type or want a bulk supply.

View on Amazon

Moen 3919 2.2 GPM Male Thread Kitchen Faucet Aerator, Chrome

Best for: Best for a higher-flow kitchen

If your current aerator feels weak and you want stronger water delivery for washing large pots, this 2.2 GPM model is the one to compare. It is a male-thread Moen-listed replacement in a chrome finish.

Key specs

• Flow rate: 2.2 GPM
• Thread type: male
• Finish: chrome

Pros

• Higher flow than the 1.5 GPM options
• Moen-listed part number
• Chrome finish is commonly matched to kitchen faucets

Cons

• Higher flow uses more water, which may conflict with local efficiency rules
• Only works with male-thread housings

Bottom line: Choose this if you want more force from the spout and your faucet and local rules allow it.

View on Amazon

3 Pack Faucet Aerator, 116711 Faucet Aerator 1.5 Gpm (black)

Best for: Best budget pick

This three-pack suits households with several Moen sinks or anyone who wants spares on hand. The black finish is useful for faucets with a dark or matte look, where a chrome insert would stand out.

Key specs

• Flow rate: 1.5 GPM
• Model reference: 116711
• Quantity: 3 pieces

Pros

• Three replacements in one order
• Matches the 116711 reference
• Black finish option

Cons

• Black finish may not match every Moen faucet finish
• Third-party part, so compare dimensions to your original

Bottom line: A good fit for multi-sink homes and anyone who wants a spare aerator for future clogs.

View on Amazon

LaWana 216721 Water Faucet Aerator for Moen, 1.0 GPM Low Flow Fix, Anti-Splash Honeycomb Filter Insert

Best for: Best for low-flow with anti-splash

People who find their sink splashes heavily, or who want to cut water use further, often compare this 1.0 GPM insert with a honeycomb anti-splash filter. The listing targets Moen aerators specifically.

Key specs

• Flow rate: 1.0 GPM
• Model reference: 216721
• Honeycomb anti-splash filter
• Quantity: 2 pieces

Pros

• Lowest flow rate in this list
• Anti-splash honeycomb design
• Two-pack for a spare

Cons

• Low flow can feel slow when filling large pots
• Owners sometimes report it needs checking for correct seating

Bottom line: Suited to anyone prioritizing water savings and reduced splash over fast filling.

View on Amazon

Buying Guide

Flow rate (GPM)

Flow rate is the most important specification. Most Moen kitchen aerators are rated at 1.5 GPM, while 2.2 GPM is common on older or higher-flow models, and 1.0 GPM is a low-flow option. Check the rating stamped on your current insert before buying. Some local water rules limit maximum flow for newer fixtures, so confirm your area’s requirements if you are changing to a higher rate.

Good picks for this: 116711 Faucet Aerator 1.5 Gpm; Moen 3919 2.2 GPM

Thread type (internal or external)

Aerators thread into the faucet spout either on the inside (female) or outside (male). Remove the old aerator with pliers wrapped in a cloth and look at which part threads into the spout. Matching thread type is essential, or the insert will not seat. If you are unsure, a multi-thread pack lets you test options.

Good picks for this: SHAP+ Faucet Aerator; Moen 3919 2.2 GPM

Model number and fit

Many Moen aerators are identified by a model reference such as 116711 or 216721. Look for the number stamped on the old insert or in the faucet’s manual. Matching the reference is the simplest way to avoid fit problems, and it is worth checking the diameter and height as well.

Good picks for this: Moen Eco-Performance Aerator Flow Restrictor; LaWana 216721

Spray quality and splash control

Some inserts use a honeycomb or mesh filter to reduce splash and create a smoother stream. If your sink splashes heavily, a filtered design may help. Owners often report that flow and splash are linked, so a lower-flow insert with a filter can feel more controlled.

Good picks for this: LaWana 216721; Moen Eco-Performance Aerator Flow Restrictor

Finish and appearance

The aerator is small, but a mismatched finish is visible. Chrome inserts blend with most Moen chrome faucets, while black or other finishes suit matte or dark faucets. Pick a finish that matches your faucet hardware for a clean look.

Good picks for this: Moen 3919 2.2 GPM (chrome); 3 Pack Faucet Aerator (black)

Durability and clog resistance

Aerators collect sediment, especially in areas with hard water. Owners commonly report that inserts with a fine screen clog faster, so cleaning the screen every few months helps. Keeping a spare on hand means you can swap quickly when flow drops.

Good picks for this: 3 Pack Faucet Aerator; SHAP+ Faucet Aerator (12pcs)

Quantity and spares

Buying a multi-pack gives you spares for future clogs or for other sinks. Single-piece packs suit a one-time replacement. If you have several Moen faucets, a larger quantity can make sense.

Good picks for this: SHAP+ Faucet Aerator (12pcs); 116711 Faucet Aerator 2 pcs

FAQ

How do I know which aerator my Moen faucet needs?

Unscrew the old aerator from the spout tip, noting whether it threads on the inside or outside. Look for a model number stamped on the insert, commonly 116711 or 216721. Matching the number and thread type gives the best chance of a correct fit.

Can I use a 2.2 GPM aerator instead of a 1.5 GPM one?

Physically, many aerators with the same thread type will screw in. However, flow rate affects water use and pressure feel. Check whether your local rules or your faucet’s design allow a higher flow before switching.

Do I need to turn off the water to replace the aerator?

Turning off the water is not always required, because the aerator is at the spout tip. Some people prefer to close the shutoff valves to avoid spraying. Keep a towel over the sink to catch small amounts of water.

What tools do I need?

Usually a cloth, a pair of pliers, and sometimes a small wrench. Wrap the aerator in cloth before gripping it with pliers to avoid scratching the finish. Most swaps take only a few minutes.

Why does my new aerator leak or spray unevenly?

Leaks often come from a missing or misplaced washer, or from the insert not being fully seated. Re-check the washer placement and tighten gently. Uneven spray can mean debris is trapped in the screen, so rinse the insert before installing.

How often should I replace the aerator?

There is no fixed schedule. Owners commonly replace an aerator when flow drops, the spray pattern becomes irregular, or the screen is visibly clogged. Cleaning the screen periodically can extend its life.

Conclusion

For most Moen kitchen faucets, a 1.5 GPM 116711-type insert is the most straightforward replacement, and the Moen Eco-Performance option suits anyone who wants a brand-matched part. If thread type is uncertain, the SHAP+ 12-piece pack offers flexibility. Choose the Moen 3919 2.2 GPM if you need stronger flow, the LaWana 216721 if splash and water use are the priority, and the three-pack when you want spares or a budget bulk option. Confirm the model number and thread type first, and the right pick usually becomes clear.

Sources

• Information on low-flow fixtures and how water-efficiency ratings are defined (energy.gov)
• WaterSense guidance on faucet aerators and water-saving fixture standards (epa.gov)

Related reading

• Kitchen Faucet Moen Cartridge: How to Identify, Remove and Replace It
• 6 Best Replace Moen Kitchen Faucet Hose Options Compared (2026)
• Replace Kitchen Faucet Aerator: 6 Best Picks for Easy Swaps (2026)
• Moen Kitchen Faucet Tighten Handle: 4 Best Repair Parts Compared (2026)
• Moen Kitchen Faucet Install: A Step-by-Step Guide for Beginners
• Moen Kitchen Faucet Assembly: Step-by-Step Installation Guide

About the author