We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

How to Fix Leaking Bathroom Faucet: A Step-by-Step Guide for Beginners

Learn how to fix a leaking bathroom faucet in a few hours with basic tools. Find the source of the drip, replace the worn part, and stop the leak for good.

Updated November 2026

Most leaking bathroom faucets come down to one worn part, usually a washer, cartridge, or O-ring. Learning how to fix a leaking bathroom faucet means shutting off the water, identifying the faucet type, and swapping the failed component. With basic tools and an hour or two, you can stop the drip and avoid a costly plumber visit.

Identify the Faucet Type Before You Start

The repair depends on how your faucet controls water flow. Look at the handles and the base of the faucet to narrow it down.

Shopping for one? See our guide: 4 Best Delta Bathroom Faucet Repair Kit Picks for Every Fix.

  • Compression faucet: Two separate handles, one for hot and one for cold. Leaks usually come from a rubber washer at the bottom of the stem.
  • Cartridge faucet: One or two handles that move a single cylinder. Leaks often come from a worn cartridge or its O-rings.
  • Ball faucet: One handle on a dome-shaped cap. Leaks usually trace to worn rubber seats or a springs assembly.
  • Disc faucet: One handle with a ceramic disc inside. Leaks often come from debris or a cracked disc.

Step-by-Step Repair Process

  1. Turn off the water supply valves under the sink. If the valves are stiff or do not close fully, shut off the main water line to the house.
  2. Open the faucet to drain remaining water and relieve pressure.
  3. Cover the drain with a rag so small parts cannot fall in.
  4. Pry off the decorative cap and remove the handle screw with a Phillips or hex wrench, depending on the model.
  5. Remove the handle and any packing nut or retaining clip to expose the internal valve.
  6. Take the worn part to a hardware store to match it exactly. Bring the old part, not a guess.
  7. Install the new washer, cartridge, seat, or O-ring. Coat new O-rings with plumber’s grease to prevent tearing.
  8. Reassemble in reverse order, turn the water back on slowly, and test the faucet in both hot and cold positions.

Parts and Tools You Will Likely Need

Gather these items before you open the faucet. Having everything ready prevents a half-disassembled sink.

Item Why You Need It
Replacement washer, cartridge, or O-rings Restores a watertight seal
Adjustable wrench or basin wrench Loosens nuts in tight spaces
Screwdrivers and hex keys Removes handle screws and caps
Plumber’s grease Lubricates O-rings and reduces wear
Rag or towel Protects the drain and finish

If you are unsure which parts your faucet uses, the manufacturer’s diagram or model number is the most reliable guide. For more on this, see Moen Bathroom Faucet Parts Diagram: How to Read It and Order the Right Part.

When the Leak Is Not Coming from the Faucet Itself

Sometimes the drip starts at the supply lines or the base of the faucet, not the handle. If water pools under the sink or the leak continues after the washer swap, check the connections and the drain assembly. For a broader look at finding the source, read Bathroom Faucet Is Leaking: How to Find and Fix the Drip Yourself. Tub faucets follow a different layout, so How to Fix a Leaking Bathroom Tub Faucet: A Step-by-Step Guide covers that setup.

  • Faucet repair kit: A kit with assorted washers, O-rings, and seats lets you match worn parts without a second trip to the store. View on Amazon
  • Basin wrench: Reaches the mounting nuts behind the sink where a standard wrench cannot fit. View on Amazon
  • Plumber’s grease: Keeps new O-rings supple and helps the handle move smoothly. View on Amazon

Common Mistakes and Tips

  • Skipping the water shutoff. Even a brief flow can spray water across the vanity.
  • Forcing stuck parts. Penetrating oil and a few minutes of patience beat cracked housings.
  • Buying a part by appearance alone. Small differences in diameter cause persistent leaks.
  • Overtightening the handle screw, which can strip threads in the stem.
  • Ignoring a leak after repair. Check again after a day, since a seat may still be worn.

FAQ

How long does it take to fix a leaking bathroom faucet?

Most single-handle or compression repairs take between 30 minutes and two hours, depending on how stubborn the parts are. Your first repair may take longer while you learn the layout.

Can I fix a leaking faucet without turning off the main water?

Often yes, if the under-sink shutoff valves work properly. If they leak or do not close fully, shut off the main supply to avoid flooding.

When should I call a plumber?

Call a licensed plumber if the valve body is corroded, the faucet is cracked, or the leak continues after you have replaced the internal parts. Mold, water damage behind walls, or rising water bills also warrant a professional inspection.

Conclusion

Fixing a leaking bathroom faucet is usually a matter of identifying the faucet type and replacing one worn part. Work methodically, keep track of how parts fit, and bring the old component to the store. With a little patience, a steady drip can become a quiet, watertight sink.

Lauren Holland

About Lauren Holland

Lauren Holland is part of our editorial team and reviews and edits our kitchen & bathroom fixtures guides, checking product details against manufacturer specifications and owner feedback.

About the author

Lauren Holland
Lauren Holland

Lauren Holland writes reviews and buying guides for Kitchen Bath Channel.