How to Remove Moen Kitchen Faucet: A Step-by-Step Guide for Beginners
Learn how to remove a Moen kitchen faucet step by step, from shutting off the water to disconnecting supply lines and lifting out the old unit cleanly.
Updated November 2026
Removing a Moen kitchen faucet is a manageable weekend job if you shut off the water first and work methodically. In most cases you will need a basin wrench, an adjustable wrench, and about 30 to 60 minutes. This guide walks through how to remove a kitchen faucet Moen style, from disconnecting the supply lines to lifting the unit off the sink deck.
Before You Start: Shut Off the Water and Gather Tools
Turn off the shutoff valves under the sink by rotating them clockwise until they stop. Then open the faucet to relieve pressure and let any remaining water drain. Place a towel or small bucket under the connections, because a few tablespoons of water will usually come out when you loosen the lines.
Shopping for one? See our guide: 6 Best Kitchen Sink Faucet Moen Models for Every Need (2026).
- Basin wrench (for reaching mounting nuts under the sink)
- Adjustable wrench or pliers
- Flashlight or headlamp
- Towels and a shallow bucket
- Plastic putty knife or scraper to remove old sealant
Step-by-Step: How to Remove a Kitchen Faucet Moen Model
Disconnect the Supply Lines
Under the sink, unscrew the two flexible supply lines from the shutoff valves. Use the adjustable wrench to hold the valve steady while you turn the nut. If the faucet has a separate spray hose, disconnect it from the base of the unit as well, and note how it routes through the deck.
Remove the Mounting Nut and Hardware
Locate the mounting nut or plastic mounting shank under the sink on the faucet base. Reach it with the basin wrench and turn counterclockwise. Some Moen installations use a mounting plate and two screws instead, so check before forcing anything. Loosen the nut until the faucet body can move freely.
Lift the Faucet Off the Sink
Go to the top of the sink and gently lift the faucet straight up. If it is stuck, the seal or old plumber’s putty may be holding it. Slide a plastic putty knife around the base to break the seal, then lift again. Avoid prying against the finish, which can scratch or crack the base.
Clean the Sink Deck Before Reinstalling
Once the faucet is off, scrape away any old putty or gasket residue so the new unit seats flat. Wipe the surface dry. A clean deck prevents leaks and helps the new gasket or mounting plate compress evenly. If you are replacing only the cartridge rather than the whole faucet, you can leave the body in place and follow a different process; see How to Remove Moen Kitchen Faucet Cartridge: Step-by-Step (2026).
Common Mistakes to Avoid
- Skipping the shutoff valves, which leads to water spraying during disconnection.
- Forcing the mounting nut without first checking whether a plate and screws hold the faucet.
- Using metal tools on the faucet finish, which can leave marks.
- Reconnecting supply lines without checking the washers, which often cause drips.
- Turning the water back on before tightening every connection by hand first.
Recommended Gear
A basin wrench is the single most useful tool for this job, since it reaches the mounting nut in tight cabinet space. View on Amazon
A plastic putty knife breaks old sealant without scratching the sink deck or faucet base. View on Amazon
A headlamp keeps both hands free while you work in the dim cabinet under the sink. View on Amazon
FAQ
Do I need to turn off the main water supply?
Usually no. Closing the two shutoff valves under the sink is enough for most kitchen faucets. If those valves are old or do not close fully, shut off the main supply at the house.
Can I remove a Moen faucet without a basin wrench?
You can sometimes reach the mounting nut with a long adjustable wrench, but a basin wrench is much easier in tight spaces. Many homeowners find it worth buying for this one job.
Why is my Moen faucet so hard to lift off?
Old plumber’s putty or hardened gasket material is the usual cause. Work a plastic scraper around the base to break the seal, then lift straight up.
Conclusion
Removing a Moen kitchen faucet comes down to shutting off the water, disconnecting the lines, loosening the mounting hardware, and lifting the unit clear. Take your time with the mounting nut and clean the deck well before installing anything new. If the job turns up corroded fittings or damaged shutoff valves, consult a licensed plumber before continuing.
Related reading
- Kitchen Faucet Moen Cartridge: How to Identify, Remove and Replace It
- Moen Faucet Drips Kitchen: How to Find and Stop the Leak (Step-by-Step)
- How to Remove a Kitchen Sink Faucet: A Step-by-Step Guide
- Replacement Cartridge for Moen Kitchen Faucet: A Step-by-Step Guide (2026)
Ready to choose one?
