We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

How to Repair a Dripping Faucet in the Kitchen: A Step-by-Step Guide

Learn how to repair a dripping faucet in the kitchen. Identify the leak source, shut off water, replace the cartridge or washer, and stop the drip for good.

Updated November 2026

To repair a dripping faucet in the kitchen, you shut off the water, identify the type of faucet, and replace the worn part causing the leak, usually a cartridge, washer, or O-ring. Most repairs take under an hour with basic hand tools. This guide walks through each step so you can stop the drip and avoid wasting water.

Identify Your Faucet Type First

Before you take anything apart, figure out which mechanism you have. The style determines which part needs replacing.

Shopping for one? See our guide: 5 Best Kitchen Faucet Parts Price Pfister Options for Easy Repairs (2026).

  • Compression faucets have separate hot and cold handles and use rubber washers that compress against a valve seat. They tend to drip from the spout when the handle is closed.
  • Cartridge faucets use a single cylinder inside the body. Single-handle models from many brands use this design.
  • Ball faucets have a slotted metal ball and several rubber seals. They are common in older single-handle kitchen faucets.
  • Ceramic disc faucets use two ceramic discs. They rarely drip, but when they do, the cartridge is usually the fix.

If you are unsure which type you have, check the manufacturer’s name and model number under the sink or on the packaging. Many brands publish repair diagrams that show each part.

Shut Off the Water and Prepare Your Tools

Close the under-sink shutoff valves for both hot and cold lines. If the valves are stiff or do not close fully, shut off the main water supply to the house. Then open the faucet to drain residual water and place a towel in the sink basin to protect the finish and catch small parts.

Gather these tools before you start:

  1. Adjustable wrench and a set of Allen (hex) keys
  2. Phillips and flat-head screwdrivers
  3. Plumber’s grease and a small cup for holding screws
  4. Replacement cartridge, washers, or O-rings matched to your faucet model
  5. A cloth to protect chrome from wrench marks

Remove the Handle and Access the Cartridge or Washer

Most kitchen handles are held by a set screw, often hidden under a decorative cap or button. Pry off the cap gently with a flat-head screwdriver, then loosen the screw. Lift the handle straight up. If it resists, wiggle it side to side rather than forcing it.

Next, remove the retaining nut or clip that holds the cartridge or stem in place. Pull the part straight out. Compare it to your replacement before discarding the old one. Bring the old part to a hardware store if you need an exact match.

For compression faucets, unscrew the packing nut, lift out the stem, and replace the rubber washer at the bottom. Also check the valve seat for grit or corrosion.

Install the New Part and Test the Faucet

Lightly coat the new cartridge or O-rings with plumber’s grease. This helps seals slide into place and extends their life. Insert the part in the same orientation as the original, aligning any tabs or notches. Reassemble in reverse order, tightening screws firmly but not so hard that you crack plastic components.

Turn the water supply back on slowly. Open the faucet, check for leaks at the base and handle, then close it and watch the spout for drips over a few minutes. If the leak continues, the valve seat may be damaged, which usually requires a seat-wrench tool or a full replacement.

Common Mistakes

  • Skipping the water shutoff step, which leads to spraying water and lost parts.
  • Buying a generic cartridge without matching the brand and model.
  • Overtightening the retaining nut, which can crack the body.
  • Forgetting to check the O-rings, even when you replace the cartridge.
  • Reassembling the cartridge backward or with a misaligned tab.
  • Plumber’s silicone grease helps seals move smoothly and protects them from drying out. View on Amazon
  • Faucet cartridge puller makes it easier to remove a stuck cartridge without damaging the body. View on Amazon
  • Adjustable basin wrench reaches the retaining nuts in tight spaces under the sink. View on Amazon

FAQ

Why does my kitchen faucet keep dripping after I replace the washer?

The valve seat may be worn or pitted, so the new washer cannot seal properly. Inspect the seat and resurface or replace it if needed.

Do I need to replace the whole faucet to stop a drip?

Usually not. Most drips come from a worn cartridge, washer, or O-ring, which are inexpensive and quick to replace on most models.

How do I know which replacement part to buy?

Note the brand and model number, then check the manufacturer’s parts list or bring the old cartridge to a hardware store for comparison.

Conclusion

Fixing a dripping kitchen faucet comes down to identifying the faucet type, shutting off water, and replacing the worn part. With matched parts and a careful reassembly, most drips stop in one session. If the leak persists or plumbing connections look damaged, consult a licensed plumber.

Miles Sinclair

About Miles Sinclair

Miles Sinclair is part of our editorial team and reviews and edits our kitchen & bathroom fixtures guides, checking product details against manufacturer specifications and owner feedback.

About the author

Miles Sinclair
Miles Sinclair

Miles Sinclair writes reviews and buying guides for Kitchen Bath Channel.