We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

How to Repair Leaky Kitchen Faucet: A Step-by-Step Guide for Beginners

Learn how to repair a leaky kitchen faucet in a few steps. Find the leak source, shut off the water, replace the worn cartridge or washers, and stop the drip.

Updated November 2026

Learning how to repair leaky kitchen faucet problems saves water and stops the steady drip that wastes money and keeps you up at night. Most leaks come from a worn cartridge, a failing washer, or a damaged O-ring, and each one can be replaced with basic hand tools. This guide walks you through finding the source of the leak, shutting off the water, and making the fix.

Identify Where the Leak Is Coming From

Before you take anything apart, figure out where the water is escaping. A drip from the spout almost always points to the cartridge or valve inside the faucet body. Water that pools at the base of the faucet or under the handle usually means a loose or cracked O-ring. Leaks at the sprayer hose point to a worn sprayer valve or hose connection. If you want a more detailed breakdown of drip sources, the article Moen Faucet Drips Kitchen: How to Find and Stop the Leak (Step-by-Step) covers the common patterns.

Shopping for one? See our guide: 5 Best Kitchen Faucet Parts Price Pfister Options for Easy Repairs (2026).

Shut Off the Water and Prepare Your Tools

Turn off the water supply under the sink by closing both shutoff valves. Then open the faucet to drain the remaining water and place a towel in the basin to protect the finish and catch any small parts. Gather these tools before you start:

  • Adjustable wrench or basin wrench
  • Phillips and flathead screwdrivers
  • Replacement cartridge, washers, or O-rings matched to your faucet brand
  • Plumber’s grease
  • Small bowl for screws and parts

Replace the Cartridge, Washers, or O-Rings

Remove the Handle and Access the Cartridge

Pry off the decorative cap on the handle, remove the retaining screw, and lift the handle straight up. Some faucets use a clip or set screw instead, so check the faucet’s manual before forcing anything. Once the handle is off, unscrew the cap or retaining nut to expose the cartridge.

Pull the Old Cartridge and Compare It

Lift out the cartridge and compare it to your replacement. Matching the brand, model, and size matters, because a cartridge that looks similar may not seat properly. Many manufacturers, including Moen and Delta, use model-specific cartridges, so look for the number stamped on the old part.

Install the New Parts

Coat new O-rings with plumber’s grease, then seat the new cartridge in the same orientation as the old one. Reassemble the retaining nut, handle, and cap in reverse order. Hand-tighten first, then snug the screws without overtightening, since cracked plastic is a common mistake.

Test the Faucet and Check for Remaining Leaks

Turn the water supply back on slowly, then run the faucet at low and high settings. Watch the spout and base for drips for a full minute. If the leak persists, the cartridge may not be seated fully, or the O-ring may be pinched. Repeat the disassembly and check the orientation.

  • Plumber’s grease keeps O-rings flexible and helps the cartridge slide smoothly during reinstallation. View on Amazon
  • Basin wrench reaches the mounting nuts behind the sink where a standard wrench cannot fit. View on Amazon
  • Faucet repair kit bundles common washers and O-rings so you have spares on hand. View on Amazon

Common Mistakes to Avoid

  • Skipping the water shutoff, which leads to a soaked cabinet and a wet floor.
  • Buying a generic cartridge that does not match your faucet model.
  • Overtightening the handle screws, which can crack plastic components.
  • Forgetting to lubricate O-rings, causing them to tear during installation.
  • Ignoring a loose base, since a leak there can often be fixed by tightening the mounting nut.

FAQ

How long does it take to repair a leaky kitchen faucet?

Most repairs take between 30 and 60 minutes, depending on access and how familiar you are with your faucet design. Plan extra time if the parts are hard to find.

Can I fix a leaky faucet without replacing the whole unit?

Yes. In most cases, replacing the cartridge, washers, or O-rings is enough. A full replacement is usually only needed if the faucet body is cracked or corroded.

When should I call a plumber?

If the leak comes from the supply lines under the sink, or if you cannot identify the faucet brand, consult a licensed plumber. Professional help is also wise if you are unsure about shutting off the water safely.

Conclusion

Repairing a leaky kitchen faucet usually comes down to finding the leak source, shutting off the water, and replacing the worn cartridge or O-rings. With matched replacement parts and a little plumber’s grease, most drips stop within an hour. For brand-specific instructions, the guide How to Repair a Moen Kitchen Faucet: A Step-by-Step Guide for Beginners is a helpful next read.

Miles Sinclair

About Miles Sinclair

Miles Sinclair is part of our editorial team and reviews and edits our kitchen & bathroom fixtures guides, checking product details against manufacturer specifications and owner feedback.

About the author

Miles Sinclair
Miles Sinclair

Miles Sinclair writes reviews and buying guides for Kitchen Bath Channel.