Removing a Kitchen Faucet: A Step-by-Step Guide for Beginners
Learn how to remove a kitchen faucet step by step, from shutting off the water to disconnecting supply lines and lifting out the old unit cleanly.
Updated November 2026
Removing a kitchen faucet is a manageable weekend task once you know the order of operations. You will shut off the water, disconnect the supply lines, release the mounting nut or clips underneath the sink, and lift the old faucet out. Most standard single-hole and three-hole faucets come off with basic hand tools in under an hour.
Prepare the Work Area Before You Start
Start by shutting off the water supply. Look for two small shutoff valves under the sink, one for hot and one for cold, and turn them clockwise until they stop. Then open the faucet to relieve pressure and let any remaining water drain into a bucket.
Shopping for one? See our guide: Delta Tap Kitchen Faucet Review: Key Features Explained.
Clear everything out of the cabinet and set a towel or pad in the bottom so small parts do not get lost. Take a photo of the existing setup, especially how the lines and mounting hardware are arranged. That photo is your reference when you install the new unit.
Disconnect the Supply Lines and Mounting Hardware
Place a bucket under the connections, then loosen the compression nuts on the braided or copper supply lines with an adjustable wrench. Hold the valve body steady with a second wrench so you do not twist the shutoff valve. Remove the lines and cap the valve ends if you are not installing a replacement right away.
Next, reach under the sink and find the mounting hardware. Most faucets use one of three methods:
- Mounting nut on a threaded shank: Unscrew the nut with a basin wrench, which reaches tight spaces better than a standard wrench.
- Mounting clips or plates: Loosen the set screws or flat-head screws holding the clip, then slide it off.
- Pull-down or pull-out hoses: Disconnect the hose from the coupling under the sink, then detach the weight or counterweight if one is present.
Lift Out the Faucet and Clean the Surface
With the hardware removed, lift the faucet straight up from the sink deck. Old silicone or plumber’s putty may hold it in place, so run a plastic putty knife around the base to break the seal. Avoid metal scrapers, which can scratch stainless steel or porcelain.
Once the faucet is out, scrape away old putty or sealant and wipe the mounting surface clean. A clean, dry deck helps the new faucet seat evenly and reduces the chance of leaks. If you plan to install a replacement with a different hole pattern, check the sink’s hole count and spacing before you buy. For reference, the basics of hole layout are covered in Three Hole Faucet Kitchen Guide: Setup, Sizing and Buying Tips and Wall Mounted Kitchen Sink Faucet: A Step-by-Step Guide for Beginners.
Removing a Kitchen Faucet With Special Hardware
Some brands use proprietary mounting systems that do not follow the standard nut-and-shank pattern. For example, certain Moen and Kohler models secure with a plastic or metal mounting base that must be unscrewed in a specific direction. If the hardware does not match the descriptions above, check the manufacturer’s installation sheet, which is often available online by model number. For brand-specific steps, see Moen Kitchen Faucet Install: A Step-by-Step Guide for Beginners.
Common Mistakes
- Forgetting to shut off both valves, which leaves water pressure in the lines and causes unexpected spray.
- Forcing a stuck nut without penetrating oil or a basin wrench, which can crack the shank or damage the sink.
- Twisting the shutoff valves, which can cause them to leak after you turn the water back on.
- Skipping the photo of the original setup, which makes reassembly harder.
- Letting debris fall into the drain. Stuff a rag in the opening while you work.
Recommended gear
A basin wrench is the single most useful tool for this job because it reaches mounting nuts tucked behind the sink. View on Amazon
A penetrating oil helps loosen corroded nuts and clips that resist normal force. View on Amazon
A plastic putty knife removes old sealant without scratching the sink surface. View on Amazon
FAQ
Do I need to turn off the main water supply to remove a kitchen faucet?
Usually no. The shutoff valves under the sink control the faucet’s water, so closing those is enough. If the valves are stuck or missing, shut off the main supply to the house before you begin.
Can I remove a kitchen faucet without a basin wrench?
You can, but it is harder. A standard adjustable wrench may not fit the mounting nut in tight cabinets, so a basin wrench is strongly recommended.
What if the faucet will not lift out after I remove the hardware?
Old sealant or putty is the most common cause. Run a plastic putty knife around the base to break the seal, then try again. If it still will not move, check for remaining clips or hidden fasteners.
Conclusion
Removing a kitchen faucet comes down to shutting off the water, disconnecting the lines, releasing the mounting hardware and cleaning the deck. Take a photo before you start and keep the hardware organized. If anything looks unusual or you are unsure about the water supply connections, consult a licensed plumber.
Related reading
- Wall Hung Kitchen Faucet: A Step-by-Step Guide to Choosing and Installing One
- Two Handle Faucet Kitchen: 7 Best Picks Compared (2026)
Ready to choose one?
