We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Types of Bathroom Faucet: 5 Main Styles and How to Choose One (2026)

Learn the main types of bathroom faucet, from single-handle and widespread to wall-mount and tub-mount, and how to pick the right one for your sink.

Updated November 2026

The main types of bathroom faucet fall into a handful of mounting and handle styles, and the right choice depends on your sink, your countertop and how you like to control water temperature. This guide walks through the common types of bathroom faucet, what sets each one apart, and how to match a style to your vanity before you buy.

Start With How the Faucet Mounts

Mounting style decides which faucets will physically fit your setup. Measure before you shop: look at the number of holes already drilled in your sink or countertop, and note the distance between them if there are more than one.

Shopping for one? See our guide: 10 Best Wall Mounted Faucet Bathroom Options for Every Need (2026).

  • Single-hole faucets use one opening and combine hot and cold water in one body. They suit small vanities and sinks with a single drilled hole.
  • Centerset faucets sit on three holes spaced about 4 inches apart, with the handles mounted on a shared base.
  • Widespread faucets have three separate pieces (spout and two handles) spaced across a sink with holes typically 8 inches apart, which is common on older and traditional vanities.
  • Wall-mount faucets attach to the wall behind the sink, freeing the countertop completely. They require rough-in plumbing and are usually a renovation job.

Compare Handle Styles

Once you know the mounting pattern, decide how you want to control the water. Handle style affects how quickly you can adjust temperature and how the faucet looks.

  • Single-handle (lever) faucets use one lever that moves up for flow and side to side for temperature. Owners often report these are easiest to use with wet hands.
  • Double-handle faucets have separate hot and cold knobs or levers. They are common on widespread and centerset designs and give a classic look.
  • Touchless or sensor faucets start and stop water with a hand wave or touch, which many households find more hygienic in shared bathrooms.

Choose Based on Your Vanity and Use

Match the faucet to the sink’s depth, spout height and the room’s daily use. A tall vessel sink needs a higher spout so water clears the basin, while an undermount sink works with a lower, compact body. Check the spout reach against the sink’s front edge so water lands in the bowl, not on the counter.

Faucet type Best for Installation note
Single-hole Small vanities, one-hole sinks Easiest DIY install
Centerset Standard 4-inch sink holes Fits most mid-size vanities
Widespread Traditional or 8-inch sink holes Needs matching hole spacing
Wall-mount Freestanding or clean-look sinks Requires wall plumbing changes

Quick Checklist Before You Buy

  1. Count the holes in your sink or countertop and measure the spacing between them.
  2. Note your sink’s depth and the distance from the faucet base to the basin edge.
  3. Choose a handle style you can operate easily with wet or soapy hands.
  4. Confirm the finish matches your other fixtures, such as drawer pulls and lighting.
  5. Check whether the faucet includes a pop-up drain or needs one purchased separately.

Common Mistakes

  • Buying a widespread faucet for a single-hole sink, or the reverse, without measuring first.
  • Choosing a spout that is too short for a deep vessel bowl, which causes splashing.
  • Ignoring the finish; mismatched metals can look out of place next to hardware and lighting.
  • Forgetting the drain assembly, which is often sold separately.

FAQ

What is the most common type of bathroom faucet?

Single-hole and centerset faucets are widely used because they fit the standard drilled sinks in many homes. Measuring your existing holes will tell you which style your sink supports.

Can I change from a widespread faucet to a single-hole faucet?

Yes, but you will need a deck plate or cover to hide the unused holes. Some installers recommend a professional if the sink or countertop needs modification.

Are touchless bathroom faucets worth it?

They are useful for shared or high-traffic bathrooms and can reduce hand contact with the handle. Battery life and sensor reliability vary by model, so check the manufacturer’s specifications.

Conclusion

Start by measuring your sink holes, then choose the mounting style and handle type that fit your vanity. Once the basics match, compare spout height, finish and included hardware. If a wall-mount or plumbing change is involved, consult a licensed plumber.

Lauren Holland

About Lauren Holland

Lauren Holland is part of our editorial team and reviews and edits our kitchen & bathroom fixtures guides, checking product details against manufacturer specifications and owner feedback.

About the author

Lauren Holland
Lauren Holland

Lauren Holland writes reviews and buying guides for Kitchen Bath Channel.