We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Dripping Faucet Repair Kitchen: 5 Steps to Stop the Drip for Good

Learn how dripping faucet repair in the kitchen works, from finding the cause to replacing the cartridge or washer. Clear steps for stopping drips for good.

Updated November 2026

Dripping faucet repair in the kitchen usually comes down to replacing one worn part, and most homeowners can do it in under an hour with basic tools. This guide shows you how to shut off the water, identify the type of faucet you have, find the source of the drip, and replace the component that is failing. You will also learn when a repair kit is enough and when it makes sense to replace the whole faucet.

Identify Your Faucet Type First

Before you take anything apart, figure out which mechanism your faucet uses. The type determines which part is likely leaking and which replacement you need.

Shopping for one? See our guide: 5 Best Kitchen Faucet Parts Price Pfister Options for Easy Repairs (2026).

  • Compression faucets have two separate handles for hot and cold. Drips usually come from a worn rubber washer and seat.
  • Cartridge faucets use a single handle or a cartridge that controls both temperatures. Drips usually come from a worn cartridge or O-rings.
  • Ball faucets have one handle on a rotating ball. Drips often come from worn seats and springs.
  • Ceramic disc faucets use two ceramic discs. Drips often come from debris or cracked discs.

Look up the brand and model, often printed under the sink or on the spout base. Many manufacturers publish parts diagrams, which will save you time.

Shut Off the Water and Prepare the Work Area

  1. Close the under-sink shutoff valves by turning them clockwise until they stop.
  2. Open the faucet to drain remaining water and confirm the flow has stopped.
  3. Cover the sink drain with a towel so small parts cannot fall in.
  4. Gather a flathead and Phillips screwdriver, an adjustable wrench, plumber’s grease, and replacement parts.

Find and Replace the Worn Part

Remove the handle first, usually by loosening a set screw or pulling off a decorative cap. Then remove the cartridge, stem, or disc assembly. Check the parts for the common causes of drips.

Check for Common Wear

  • Cracked or flattened rubber washers and O-rings
  • Mineral buildup or grit on the seat or cartridge
  • Corroded springs or pitted valve seats

Replace the cartridge or the worn components as a set when possible. Apply a thin layer of plumber’s grease to new O-rings before installing them, then reassemble in reverse order and turn the water back on slowly.

Test the Repair and Know When to Replace the Faucet

Run the faucet on hot and cold and check for drips at the spout after the handle is closed. A small drip that returns after a few days often means a seat is still worn or debris is trapped. If the body of the faucet is corroded, the spout cracks, or the parts are no longer made, replacing the whole faucet is usually the better option.

Common Mistakes to Avoid

  • Skipping the shutoff valves and getting sprayed in the face.
  • Replacing only the washer when the seat is the real problem.
  • Overtightening the handle or packing nut, which can crack plastic parts.
  • Mixing up hot and cold sides during reassembly.
  • Forgetting to take a photo of each step before disassembly.
  • Plumber’s grease helps O-rings seal and slide smoothly during reassembly. View on Amazon
  • Adjustable wrench gives you grip on packing nuts and valve bodies without damaging finishes. View on Amazon
  • Faucet cartridge replacement kit supplies the matching parts for many common kitchen faucet models. View on Amazon

FAQ

Why does my kitchen faucet keep dripping after I replace the washer?

The valve seat underneath is often the real problem and may be pitted or worn. Inspect and smooth or replace the seat, or switch to a new cartridge.

How do I know which replacement part I need?

Match the faucet brand, model, and type using the markings on the faucet or manufacturer diagrams. Bring the old part to a hardware store if you are unsure.

When should I call a plumber?

Call a licensed plumber if the shutoff valves fail, the pipes leak, or the faucet body is damaged. Consult a professional for any work involving gas lines or structural plumbing.

Conclusion

A dripping kitchen faucet is usually a worn washer, cartridge, or seat that can be replaced with basic tools. Identify your faucet type, shut off the water, and replace the failing part carefully. If the repair does not hold, a new faucet may be the more reliable fix.

Miles Sinclair

About Miles Sinclair

Miles Sinclair is part of our editorial team and reviews and edits our kitchen & bathroom fixtures guides, checking product details against manufacturer specifications and owner feedback.

About the author

Miles Sinclair
Miles Sinclair

Miles Sinclair writes reviews and buying guides for Kitchen Bath Channel.