We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

How to Fix Leaky Faucet Single Handle Bathroom: A Step-by-Step Guide

Learn how to fix leaky faucet single handle bathroom issues yourself. Shut off water, pull the cartridge, replace worn parts, and stop the drip in under an hour

Updated November 2026

To fix a leaky single handle bathroom faucet, you shut off the water, remove the handle, pull out the cartridge or valve stem, and replace the worn O-rings, seals or cartridge. Most drips come from one of these parts wearing out, and the repair usually takes under an hour with basic hand tools. The steps below cover the most common single-handle designs.

Identify the Type of Single Handle Faucet

Before you buy any parts, check which cartridge style your faucet uses. Single handle bathroom faucets generally fall into three groups: ball faucets, cartridge faucets and ceramic disc faucets. A ball faucet has a slotted metal ball under a cap and is usually found on older units. A cartridge faucet has a single plastic or brass cylinder, and a ceramic disc faucet has a square or round cartridge with two ceramic plates inside. Manufacturers list the cartridge type in their installation guides, and many brands print a model number under the handle.

Shopping for one? See our guide: Single Handle Bathroom Faucet Moen Review: Key Features Explained.

Step-by-Step Repair for a Cartridge or Disc Faucet

  1. Turn off the water supply valves under the sink. If the valves are stiff or do not close fully, shut off the main water line to the house.
  2. Open the faucet to drain remaining water and relieve pressure.
  3. Pry off the decorative cap on top of the handle with a flat blade, then remove the handle screw.
  4. Lift off the handle. Remove the retaining nut or clip that holds the cartridge in place. Some models use a small set screw, so check the base of the handle.
  5. Pull the cartridge straight up. Use a cartridge puller if it sticks. Do not twist it hard, because that can crack the body.
  6. Inspect the cartridge and the valve seat inside the faucet body for mineral buildup, grit or cracks.
  7. Replace the cartridge with an identical model, or swap in new O-rings and seals if the cartridge is in good shape.
  8. Reassemble in reverse order, turn the water back on slowly, and test the faucet at low and high flow.

Repairing a Ball Faucet

Ball faucets need a slightly different approach. After you remove the handle and cap, lift out the metal ball, then replace the rubber seats and springs beneath it. Clean the faucet body thoroughly before reinstalling. If the cam (the cup-shaped part with notches) is worn, replace it as well, since a worn cam is a common cause of leaks around the spout.

Common Causes and Quick Checks

Symptom Likely cause Fix
Drip from the spout when handle is off Worn cartridge or valve seat Replace cartridge, clean seat
Leak around the base of the handle Worn O-rings Replace O-rings
Water hard to shut off Mineral buildup Soak or replace cartridge
Hot and cold mixing wrong Misaligned or damaged cartridge Reinstall or replace cartridge

If you are unsure which part is failing, compare the symptom in the table above before you disassemble anything. For a broader look at drip sources, see Bathroom Faucet Is Leaking: How to Find and Fix the Drip Yourself.

A cartridge puller helps you remove a stuck cartridge without damaging the faucet body, which is useful when mineral deposits have bonded the parts together. View on Amazon

Plumber’s silicone grease keeps new O-rings moving smoothly and helps them seal. View on Amazon

A replacement cartridge matched to your faucet brand is the most reliable fix when the old one is worn. Confirm the model number before ordering. View on Amazon

Tips and Common Mistakes

  • Take photos at each step so you remember how the parts go back together.
  • Do not use pliers on chrome finishes, because they scratch easily. Wrap the jaws in a cloth.
  • Avoid mixing cartridge brands. A cartridge from one manufacturer often will not fit another.
  • Plug the sink drain so small screws and clips do not disappear.
  • If the faucet still leaks after a new cartridge, check the valve seat for pitting. Mineral damage there may require a replacement faucet body.

For tub-spout leaks or other fixtures, see How to Fix a Leaky Bathroom Tub Faucet: A Step-by-Step Guide.

FAQ

Do I need to shut off the main water to fix a single handle faucet?

Usually not. Closing the shutoff valves under the sink is enough for most bathroom faucets. If those valves are stuck or leak, shut off the main supply to the house.

How do I know which cartridge to buy?

Remove the old cartridge and bring it to the store, or read the model number printed on the handle or in the manufacturer’s manual. Matching the brand and model avoids fit problems.

Why does my faucet still drip after I replace the cartridge?

The valve seat inside the faucet body may be corroded or scored. Clean it carefully, and if the damage is visible, the faucet body may need replacing.

Conclusion

Most single handle bathroom leaks trace back to a worn cartridge, O-ring or seat, and you can fix them with basic tools in an afternoon. Work slowly, keep parts organized, and match replacement parts to your faucet’s model. If the leak persists or the faucet shows heavy corrosion, consider consulting a licensed plumber.

Lauren Holland

About Lauren Holland

Lauren Holland is part of our editorial team and reviews and edits our kitchen & bathroom fixtures guides, checking product details against manufacturer specifications and owner feedback.

About the author

Lauren Holland
Lauren Holland

Lauren Holland writes reviews and buying guides for Kitchen Bath Channel.